Menu

42~60W Dali Dimmable panel light

Giá: Liên hệ

Dali Dimmable LED Light Panel

(1) 180~295VAC input only.
(2) Built-in active PFC.
(3) Output current level selectable by OIP switch led dali driver panel light.
(4) Built-in DALI interface and push dimming function(DA version).
(5) Built-in 0~10Vdc and PWM signal dimming function(Non-DA version).
(6) Power suppy synchronization function up to 10 units.
(7) Temperature compensation function by external NTC.
(8) led dali driver panel light ClassⅡpower unit,ungrounded.
(9) Built-in 12V/50mA auxiliary output(Non-DA version).
(10) led dali driver panel light Full plastic case enclosed.
(11) No load power consumption<1W(0.5W for DA version).
(12) Protections:Short circuit / Over voltage / Over temperature.
(13) 3 year warranty.
(14) Suitable for intelligent LED panel lighting.

VMEC hiện là đại diện độc quyền tại Việt Nam nhập khẩu, cung cấp và phân phối sản phẩm LVT LED.

Thông tin chi tiết

TECHNICAL SPECIFICATIONS

  • Selectable Current:500-1400mA
  • DC voltage range:2-90V
  • Rated Power:42~60W
  • Ripple Current:±5%
  • Ripple & Noise(max.):700mVp-p
  • No-load Output Voltage(max.):95V
  • Current Accuracy:±5.0%
  • Setup, Rise Time:500ms, 80ms / 230VAC at rated power
  • Hold Up Time:16ms/230VAC at rated power
  • Voltage Range: 180 ~ 295VAC 254 ~ 417VDC
  • Frequency Range:47 ~ 63Hz
  • Power Factor(Typ.):PF≧0.975/230VAC, PF≧0.96/277VAC at rated power
  • Total Harmonic Distortion:THD will be lower than 20% when output loading is 75% or higher
  • Efficiency(Typ.):92%
  • AC Current(Typ.):0.32A/230VAC
  • Inrush Current(Typ.)COLD START 20A(twidth=270μs measured at 50% Ipeak) at 230VAC
  • Leakage Current:<0.5mA / 240VAC
  • Short Circuit:Constant current limiting, recovers automatically after fault is removed
  • Over Voltage:105 ~ 125V
  • Over Temperature:Shut down o/p voltage, re-power on to recover
  • Auxiliary Power(optional):12V @ 50mA for driving fan; Tolerance ±5%
  • Temp.Compensation:By external NTC(not provide with the power supply)
  • Working Temp.:-30 ~ +60℃ (Refer to "Derating Curve")
  • Working Humidity: 20 ~ 90% RH non-condensing
  • Storage Temp.,Humidity:-40 ~ +80℃, 10 ~ 95% RH
  • Safety Standards:UL8750, ENEC, GB19510.14,GB19510.1 approved
  • DALI Standards:Comply with IEC62386-101, 102, 207
  • Withstand Voltage.:I/P-O/P:3.75KVAC
  • EMC Emission:Compliance to ENEC;Class C;GB17625.1,GB17743

DIP Switch Table of panel light

Dali Dimming panel light is a multiple-stage output current supply, selection of output current through DIP switch as table below.

 

Power Factor Characteristic

 

Dimming Operation

 

‧Maximum number of drivers up to 10 pcs.
‧Maximum length of the cable, from push button to last driver is 20 meter.
‧Factory setting at 100%.
‧When the light is lower than 10% it will always dim up, or when the light output is higher than 90% it will always dim down.

 

Warning:
The pushbutton can only be connected in between the PUSH terminal of Driver and AC/L (brown or black color). It would cause short circuit if it is connected to AC/N.
※DALI panel light interface(primary side)
‧DALI protocol including 16 groups and 64 addresses.
‧First step is fixed at 6% of output.

Synchronization Synchronization

‧10 drivers(max.) synchronization (1 master + 9 slaves)
‧Maximum cable length between each units : 20 meter.

 

NOTE: Please make sure all units are set to 100% dimming setting(factory default) before synchronizing.

Electrical Connection

 

 

Dali dimmable led panel light Description

TheDali led panel lightsconsists of the led panel light,DALI led power supply, DALI systems. With these, you can control all of the led panels in the building led dali driver panel light.

Các sản phẩm khác

0904 583 593